FlashRES-64 only uses ZZ in-house array to collect data. It can collect over 62k data points with 64 electrodes in one hour. This large amount of data can be used to produce much better inversion result than one produced from the data of any traditional arrays.

In theory, the voltage between M and N (Vmn) is depending on the injected current between A and B (Iab); Iab is depending on the input voltage between A and B (Vab). So if Vab increases, Vmn will then increase. But Vab cannot be increased too high, especially for multi-core cable, this is due to ...

FlashRES only weights 5kg. With suitcase design, it is very easy for user to travel with or mobilise FlashRES unit. The accessories of FlashRES system include electrodes (10kg), cables (weight depends on length) and battery (8kg).

Please refer to diagram below.

(a) Fuse (20A) 20A fuse (b) Battery (12V) 12V battery terminal connector (c) Cable 1 (1-32) 32-core cable connector for electrodes 1 - 32 (d) Ext A / Ext B Single-core AB cable connector for high voltage survey (e) Extensions Data connection wire between two F-UNI instruments for...

0.1 μV / 0.2%

Currently, there are two kinds of resistivity survey cables. One is called passive cable, another is called active cable. For passive cable, there are no electronic control parts in the cable, and all control and ADC are in the instrument. For active cable, it contains electronic parts in each el...

Please refer to our FlashRES features and specifications section.