ZZ Resistivity Imaging Pty. Ltd.
2.5 How to set up a FlashRES system?
Please refer to diagram below.
Setting up a FlashRES system is very simple. Following the simple steps below will ensure that the user can collect accurate data in timely manner:
Step 1: Put down electrodes and cables
Step 2: Connect the FlashRES system to the cables, a common ground electrode, a laptop and a 12V battery.
Step 3: Run electrode check to ensure all electrodes are well connected, poorly connect electrodes need to be investigated before carry out data collection.
On average, setting up a 189m survey line with two people takes approximately 30-40mins.