In theory, the voltage between M and N (Vmn) is depending on the injected current between A and B (Iab); Iab is depending on the input voltage between A and B (Vab). So if Vab increases, Vmn will then increase. But Vab cannot be increased too high, especially for multi-core cable, this is due to insulation safety reason.
Since FlashRES use 32-core cables (400v insulation between cores), our system is limited to maximum 3A current and maximum 350V voltage. We design external connectors for situation that needs high voltage, by connecting FlashRES with booster and using external connector, FlashRES can output 1000V voltage.
ZZ Resistivity Imaging Pty. Ltd.
firstname.lastname@example.org - Please include your contact information and exploration requirements (application/depth to target)
Address：Unit 3 / 239 Magill Rd， Maylands 5069 Adelaide, South Australia
Copyright: May 2020